PIAGGIO X8 125, Manual

Page: 61 / 88

Application : Lights - High-beam
lights
Quantity: 1
12V - 2W warning light bulbs Type: ALL GLASS
Application : Engine oil pressure -
Fuel reserve - Helmet
compartment light
Quantity: 3
Application : Turn indicators
Quantity: 2
03_28
Frontlightgroup (03_28, 03_29, 03_30)
To remove the rear light assembly, proceed as follows:
1. Remove the mirror cover, fastened by the two top screws and retained by the lower
rubber ring joining it to the lower fairing;
2. Remove both driving mirrors by loosening the fixing screws " A " on the right and left
hand-side;
3. Loosen the four fixing screws " B " and then remove the headlight cover;
4. Extract the headlight from it housing by loosening the three fixing screws " D ";
To reassemble, repeat the operation in the reverse order.
61
3 Maintenance