Synthetic fluid SAE J 1703 -FMVSS 116 - DOT 3/4 - ISO 4925 - CUNA NC 956 DOT
4
03_26
Battery (03_26)
To access the battery, proceed as follows:
1.
Place the vehicle on its centre stand;
2.
Open the saddle, following the previously described procedure;
3.
Remove the two fasteners "
A
" and the cover "
B
".
The battery is the electrical device that requires the most frequent inspections and
diligent maintenance. The main points of maintenance to be observed are as follows:
CAUTION
IN ORDER TO AVOID DAMAGING THE ELECTRICAL SYSTEM, NEVER DISCON-
NECT THE WIRING WHILE THE ENGINE IS RUNNING. DO NOT TIP THE VEHICLE
TOO MUCH IN ORDER TO AVOID DANGEROUS LEAKAGE OF THE BATTERY
ELECTROLYTE.
Useofanewbattery
Make sure that the terminals are connected correctly.
CAUTION
DO NOT REVERSE THE POLARITY: RISK OF SHORT CIRCUIT AND DAMAGE
TO THE ELECTRICAL SYSTEM.
54
3 Maintenance
Summary of Contents for X8 125
