PIAGGIO MSS ZIP 100 4T, Service Manual

Page: 31 / 192

Check
- Park the scooter on level ground and rest it on
the centre stand.
- Unscrew the dipstick « A », dry it with a clean rag
and then reinsert it, screwing it tightly into
place .
- Take out the dipstick checking oil level is between
the second and third notch from the bottom (MAX
and MIN shown in figure).
- If the level is under the MIN notch, refill the hub
with the right amount of oil.
- Screw up the oil dipstick again and make sure it
is locked properly into place.
Recommended products
AGIP ROTRA 80W-90 Rear hub oil
SAE 80W/90 Oil that exceeds the requirements of
API GL3 specifications
Replacement
- Remove the oil filling cap/dipstick «A»
- Unscrew the oil drainage cap «B» shown in the
figure and drain out all the oil.
- Screw the drainage cap back and fill up the hub
with the required oil (about 80 cc)
MSS ZIP 100 4T
Maintenance
MAIN - 31