-7-
PKI-0041-5-E
【3】Before starting the work procedures...
By using the Connection bracket (Item ⑲ ) 2 main lamp units (Item ① ) can be connected.
When installing and using the main lamp unit, follow the ■ Lamp connection procedures indicated below.
If not installing the main lamp unit using this procedure continue on to page 4,
【1】 Installation preparations
and follow the instructions indicated there. In addition, if not connecting the lamps, the connection brackets
(Item ⑲ ) and the Hexagon socket head bolt (M4/Item ⑳ ) will not be used. Therefore, please store them
properly for safekeeping.
Install the Connection bracket (Item ⑲ ) to the nut on the lamp main unit as shown in the fi gure. Use the
Hexagon socket head bolt (M4/Item ⑳ ) to secure it fi rmly in place.
Lamp main unit (Item ①）
Nut sections
Connection bracket
（Item ⑲）
Hexagon socket
head bolt (M4)
(Item ⑳）
Hexagonal wrench (M4)
(Item
㉛
)
Tightening torque：2.2ft・Ibs (3N・m)
※ The following work procedures shown below are for the
"RF6" model but the same procedures can also be used
for units "RF10" and "RF18".
■ Lamp connection procedures
