-5-
PKI-0081
●
The lamp should be mounted at an area suffi
cient to support its size and weight.
●
Insuffi
cient mounting may result in excess vibration leading to shorter life and or physical damage to the lamp or to
vehicle.
●
Do not attempt to install the lamp directly to any plastic part of the car body.
●
If the lamp needs to be installed on the plastic reinforcement materials should be placed on both sides of the plastic part.
●
When installing, make sure the lamp body, lens and rim are not touching the bumper and other plastic parts.
●
The lamps are designed to be mounted upright. But the mounting brackets can be rotated for hanging, pendant mounting.
●
Torque specifi cations on the base mounting 12mm nut is 31ft・lbs (42N・m) and 8mm nut is 8.9ft・lbs (12N・m)
Do NOT use impact wrench.
For lamp installation, three hole with a diameter of one12mm and two 8mm is required. Make necessary preparation
such as installation of lamp bracket.
■ LPX590
35mm
35mm
φ
12mm
φ
8mm
φ
8mm
12mm nut : 31ft ・lbs (42N・m)
8mm nut : 8.9ft・lbs (12N・m)
