Fixing the Load
1. Use an open-end wrench to hold the tip of the P-844 in place.
2. Tighten the nut to secure the load on the tip.
3. Remove the open-end wrench from the tip.
6.4
Connecting the P-844
Tools and Accessories
■
If necessary: Suitable cable set
■
If necessary: Suitable screwdriver for the locking screws of the connectors.
Requirements
✓
You have read and understood the
general safety instructions (p. 7)
✓
You have read and understood the user manual for the electronics used.
✓
You have installed the electronics properly.
✓
The electronics are switched off.
NOTICE
Damage due to incorrect connection of the P-844!
Connecting unsuitable electronics or a wrong cable can damage the P-844 or the electronics.
►
Connect the P-844 only to
suitable electronics from PI (p. 10)
►
Use cables from PI only to connect the P-844 to the electronics.
Connecting the P-844
1. Connect the P-844's voltage plug to the voltage socket on the electronics.
6 INSTALLATION
P844M0001EN
‒
11/13/2018
15
M O T I O N | P O S I T I O N I N G