PI P-844, User Manual, Page: 10 / 32

4.4 Overview
Figure 2: Example product view
1. Tip with M8 thread
2. AF10 wrench flat for open-end wrench
3. Housing, consisting of housing tube [3a] and base [3b]
4. Cable exit (sensor connector): For P-845 models only.
5. Cable exit (voltage connector)
6. AF17 wrench flat for open-end wrench
Arrow: Positive direction of motion of the tip
4.5 Suitable Electronics
The P-844 must be connected to suitable electronics that supply the necessary voltage for
operating the P-844. The following electronics are suitable for operating the P-844:
Product number Description
E-503 Piezo amplifier module, 3 channels, -30 to 130 V
E-505 Piezo amplifier module, 1 channel, -30 to 130 V
E-610 Piezo amplifier / servo controller, 1 channel, -30 to 130 V
E-617 High-power piezo amplifier, 1 channel, -30 to 130 V
E-621 Piezo amplifier / servo controller module, 1 channel, -30 to 130 V
E-625 Piezo amplifier / servo controller, 1 channel, -30 to 130 V
E-663 Piezo amplifier, 3 channels, -20 to 120 V
E-709 Digital piezo controller, 1 channel, -30 to 130 V
E-831 Piezo amplifier module, 1 channel, -30 to 130 V
To order, contact our customer service department (p. 25) .
4 PRODUCT DESCRIPTION P844M0001EN
‒
11/13/2018
10
M O T I O N | P O S I T I O N I N G