2 Safety
P-587 Positioner
PZ251E
Version: 1.1.0
5
In this Chapter
Intended Use .................................................................................................................................. 5
General Safety Instructions............................................................................................................ 5
Organizational Measures ............................................................................................................... 7
2.1
Intended Use
The P-587 is a laboratory device as defined by DIN EN 61010-1. It is intended for indoor use and
use in an environment that is free of dirt, oil, and lubricants.
According to its design, the P-587 is intended for fine positioning as well as moving small
objects quickly and precisely. The specifications for the P-587 apply to horizontal mounting. The
motion takes place horizontally in two axes (X, Y), vertically in one axis (Z) and rotationally in
three axes (θ
X
, θ
Y
, θ
Z
).
The P-587 can only be used as intended in conjunction with suitable electronics (p. 11) available
from PI. The electronics are not included in the scope of delivery of the P-587.
The electronics must provide the required operating voltages. To ensure proper performance of
the servo control system, the electronics must be able to read out and process the signals from
the capacitive sensors.
2.2
General Safety Instructions
The P-587 is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the P-587.
Use the P-587 for its intended purpose only, and only when it is in perfect technical
condition.
Read the user manual.
Eliminate any malfunctions that may affect safety immediately.
The operator is responsible for the correct installation and operation of the P-587.
2
Safety
