5 Installation
22
Version: 1.1.0
PZ251E
P-587 Positioner
5.5
Connecting the P-587 to the Electronics
INFORMATION
When connecting, pay attention to the assignment specified on the labeling of the sockets,
plug connectors, and cables.
Requirements
You have read and understood the general notes on installing (p. 15).
You have installed suitable electronics (p. 11).
You have read and understood the user manual for the electronics.
The electronics are switched off.
Tools and accessories
Cable set K030B0055 (p. 10)
Connecting the P-587 to the electronics
1.
Connect the first connecting cable in the following way:
−
D-sub 25W3 connector
XY ROT
of the cable to the D-sub 25W3 panel plug
XY ROT
of the P-587
−
D-sub 25W3 connector
CH1/CH2/CH3
of the cable to the D-sub 25W3 socket of the
electronics (sensor module
1
)
2.
Connect the second connecting cable in the following way:
−
D-sub 25W3 connector
Z TIP TILT
of the cable to the D-sub 25W3 panel plug
Z TIP TILT
of the P-587
−
D-sub 25W3 connector
CH4/CH5/CH6
of the cable to the D-sub 25W3 socket of the
electronics (sensor module
2
)
3.
If possible, secure the connectors against accidental disconnection.
