PI P-545, User Manual, Page: 9 / 57

2 Safety
P-545 Nanopositioners PZ272E Version: 1.1.0 5
In this Chapter
Intended Use .................................................................................................................................. 5
General Safety Instructions............................................................................................................ 5
Organizational Measures ............................................................................................................... 7
2.1 Intended Use
The P-545 positioner is a laboratory device as defined by DIN EN 61010-1. It is intended for
indoor use and use in an environment that is free of dirt, oil, and lubricants.
According to its design, the P-545 is intended for fine positioning as well as moving small
objects quickly and precisely. The specifications for the P-545 apply to horizontal mounting.
Depending on the version, moving is done as follows:
System Motion Axis
.2C8S / .2R8S In two axes horizontally X, Y
.3C8S / .3R8S / .3D8S In two axes horizontally and in one axis vertically X, Y, Z
The P-545 positioner can only be used as intended in conjunction with the controller belonging
to the system.
2.2 General Safety Instructions
The P-545 is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the P-545.

Use the P-545 for its intended purpose only, and only when it is in perfect technical
condition.

Read the user manual.

Eliminate any malfunctions that may affect safety immediately.
The operator is responsible for the correct installation and operation of the P-545.
2 Safety