PI M-228 Series, User Manual, Page: 16 / 49

3 Product Description
12 Version: 2.0.0 MP86E M­­228 / M­­229 Linear Actuators
3.5 Scope of Delivery
Product number Description
M-228 / M-229 Linear actuator according to order (p. 10)
M23010116* Flat tip (assembled on delivery)
M23010117 Ball tip
3323 Hook wrench for mounting nut
MP122EK Short instructions for M-22x / M-23x linear actuators
* M-228.10S and M-229.25S only, included in the scope of delivery.
Note that the extension cable or adapter for connecting the M-228 / M-229 with the electronics
must be ordered separately.
3.6 Suitable Controllers
The M-228 / M-229 must be connected to a suitable controller. The following devices from PI
are suitable for operation of the M-228 / M-229:
Product number Description
C-663.12 Compact Mercury Step stepper motor controller, 1 axis, closed-loop and
open-loop operation, HD D-sub 26, 48 V
C-663.12C885
Mercury Step stepper motor controller module, 1 axis, HD D-sub 26, for
PIMotionMaster, closed-loop and open-loop operation, support of
externals sensors
The required PC software is included in the scope of delivery of the controllers from PI. The
operation of the controllers is described in the corresponding user manuals.

To order, contact our customer service department (p. 33).
3.7 Accessories
Product number Description
C-815.AA42 Plug adapter for D-sub 15 (f) to HD D-sub 26 (m)
C-815.38 Motor cable for DC motors, D-sub 15 (m/f), 3 m

To order, contact our customer service department (p. 33).