User Manual
MP40E, version 1.2.0, valid for M-227.10, M-227.25, M-227.50
CBo, 5/20/2019
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 6 / 26
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
General procedure:
1.
2.
If access to the manuals is protected by a password:
a)
Click
Login
.
b)
Log in with the user name and password.
3.
Click
Search
.
4.
Enter the product number up to the period (e.g., M-227) or the product family (e.g.,
linear actuator with DC motor) into the search field.
5.
Click
Start search
or press the Enter key.
6.
Open the corresponding product detail page in the list of search results:
a)
If necessary: Scroll down the list.
b)
If necessary: Click
Load more results
at the bottom of the list.
c)
Click the corresponding product in the list.
7.
Click the
Downloads
tab.
The manuals are shown under
Documentation
.
8.
Click the desired manual and save it to the hard disk of your PC or to a data storage
medium.
Safety
Intended Use
The M-227 linear actuator is a laboratory device as defined by DIN EN 61010-1. It is intended to
be used in interior spaces and in an environment which is free of dirt, oil and lubricants.
Based on its design and realization, the M-227 is intended for single-axis positioning, adjusting
and shifting of loads at different velocities. The M-227 is
not
intended for high duty cycles and
applications in areas in which a failure would present severe risks to human beings or the
environment.
The intended use of the M-227 is only possible when completely mounted and connected and
only in conjunction with suitable electronics (p. 10) that provide the required operating
voltages. To ensure proper performance of the servo-control system, the electronics must also
be able to read out and process the signals from the rotary encoder.
The M-227 may only be started up, operated, maintained and cleaned by authorized and
qualified staff.