PI L-412 211E1 Series, User Manual

Page: 34 / 43

12.1.3 Limit Switch Specifications
Type Hall sensor
Supply voltage +5 V
Signal output 0 V / +5 V (TTL level)
Signal logic N/C contact, NPN
12.1.4 Holding Brake Specifications
For L-412.xx9211E1B models:
Parameter Value
Supply voltage 24 V
Power requirement 350 mA (min)
Static braking torque 1.42 Nm
Release brake delay 35 ms
Brake delay 36 ms
Linear brake offset 14 μm (max); 6.4 μm (typical)
12.1.5 Temperature Sensor Specifications
PTC Temperature Sensor
The L-412.xx9211E1 is equipped with a PTC temperature sensor to prevent the motor from
overheating. The electrical resistance of the PTC temperature sensor increases considerably
into the critical temperature range. The controller must cut the power supply to the motor
(switching threshold) when the critical temperature is reached.
Temperature Electrical resistance
Up to 150°C
< 550 Ω
155°C (critical temperature)
1000 Ω (switching threshold)
More than 155°C
> 1330 Ω
12.2 Maximum Ratings
The L-412.xx9211E1 is designed for the following operating data:
Maximum operating volt-
age Maximum operating fre-
quency Maximum peak current,
RMS
325 V - 10.9 A
12.3 Ambient Conditions and Classifications
The following ambient conditions and classifications for the L-412.xx9211E1 must be
observed:
12 TECHNICAL DATA L412UM0003EN
‒
10/24/2022
34
M O T I O N | P O S I T I O N I N G