19
3.2.2 Spoke
PI ROPE spokes are special textile spokes. They are made from a high-strength polyester -
Vectran ™. Protruding fibers or smaller fiber breaks caused by contact with obstacles do not
represent any damage. These can be connected to the spoke again with a commercially
available adhesive. The use of PI ROPE care products is also recommended. This ensures
the longevity of the spoke. If in doubt, contact PI ROPE GmbH.
3.2.3 Freewheel
Freewheel bodies are made of aluminium. It is therefore possible that individual sprockets
create notches / nicks in the freewheel body. These notches on the cassette are not damages.
The burrs on the notches can be removed with a file. After doing so, remove any shavings from
the freewheel.
3.2.4 Cassette
Install the cassette according to the manu
facturer‘s instructions.
3.2.5 Brake Disc
Install the disc according to the manufacturer‘s instructions.
6-hole brake disc:
•
Always tighten the bolts in a cross pattern
•
Tighten the disc to 6Nm unless otherwise specified
Center Lock brake disc:
•
Tighten the Center Lock nut according to
the manufacturer‘s instructions, if not
permitted otherwise, use a torque of 40Nm.
•
Be sure the disc doesn‘t have any axial play after installation. If this is the case,
loosen the Center Lock nut and repeat the tightening process. If there is still axial
play, contact your dealer. By no means, you should
n‘t ride if the brake discs are
loose.
