Specifications
Power Supply
Video Formats
HDCP
Network Cable
Cat6 (23AWG) or higher
1.3
1080p / 50 / 60Hz
1080i / 50 / 60Hz
720p / 50 / 60Hz
576p / 50Hz
576i / 50Hz
480p / 60Hz
480i / 60Hz
5V DC 1A
Power Consumption
Housing
Dimensions (L x W x H)
Product Weight
Operating Temperature
Storage Temperature
Humidity
Transmission Length
164 feet (50m)
TX: <2W; RX: <2W
Metal
71.6 x 66.6 x 24.8mm
2.95 oz (each side)
32 ~ 104°F (0 ~ 40°C)
-4 ~ 140°F (-20 ~ 60°C)
20-90% (non-condensing)
IR Remote Control
Supports 20-60kHz
What’s Included
Package Includes
1 - HDMI Transmitter (TX)
1 - HDMI Receiver (RX)
2 - Power Adapters
1 - IR Out Cable (IR emitter)
1 - IR In Cable (IR receiver)
1 - User Manual
Troubleshooting
Black Screen / No Signal
Receiving Side (RX) LINK
LED Constantly Flashing
1. Hit the reset button on the
receiving unit
2. Check the Ethernet cable
length and wire gauge
3. Check the HDMI cable
1. Make sure the cables are
terminated according to
EIA/TIA 568B wiring
2. Check the HDMI source to see
if it’s plugged in correctly to the
HDMI input port and that it’s
on.
3. Reset either the transmitter
or receiver by pushing the reset
button on the units
The HDMI extender is covered by a 1-year warranty
from PI Manufacturing. Under the warranty, PI Manu-
facturing will repair or replace the product.
Warranty
1. Connect the HDMI source to the HDMI In port on the
HDMI transmitter (labelled sender).
2. Connect the HDMI display to the HDMI Out port on
the HDMI transmitter.
3. Connect the HDMI display to the HDMI Out port on
the HDMI receiver.
4. Connect a Cat6 23AWG cable from the transmitter to
the receiver.
5. Connect the IR blaster to the IR Out of the transmit
-
ter. Point the IR blaster towards the IR window of the
device you want to control.
6. Connect the IR receiver to the IR In of the receiver
unit. When using the remote control, please make sure
the distance does not exceed 16 feet (5 meters).
Additonally, please make sure there are no obstructions
in between or IR control will not function. To avoid
interference, please make sure that there are no other
receiver units within the same area.
Connection Instructions
HDMI Loop Out
The HDMI-CAT6-60M-2 includes a HDMI loop out. This
allows local and remote display on both sides, useful for
certain applications.
Operation Manual
