Step 3. Select
Use the following IP address
radio button, and then enter an IP address and
subnet mask for your PC. Make sure that the device and your PC is on the same subnet.
Step 4. Click on the
OK
button, your PC’s TCP/IP settings have been configured.
Bridge Setup-Web Configuration
Step 5. Logging In
To configure the Bridge through the web-browser, enter the IP address of the Bridge into the
address bar of the web-browser (default IP:
192.168.2.1
), and press
Enter
.
If it cannot work,
pleas press the reset button which is on AP/Bridge.
Please see the reference of the enclosed
picture.
RESET button
Step 6. A screen will be popped up and request you to enter user name and password. The
default user name and password is as follows.
User Name:
Admin
Password:
1234
Enter the default user name and password, then press
OK
button directly.
17
Summary of Contents for 6917
