Parameter
Description
AP MAC Address
If you want to bridge more than one wired Ethernet networks together with
wireless LAN, you have to enter the MAC addresses of other access
points that join the bridging work.
Mode
802.11b mode:
It allows to select the transmit rate up to 11Mbps
802.11g
mode:
It allows to select the transmit rate up to 54Mbps
Mixed mode:
It provides best performance for 11g transmission when
you enable the AP mode selection to “Mixed mode”.
Channel
Select the appropriate channel from the list provided to correspond with
your network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
There are 14 channels available.
Security
Disable:
Disable the security function.
WEP:
WEP is an authentication algorithm, which protects authorized
Wireless LAN users against eavesdropping. The Authentication type and
WEP key of wireless stations must be the same with the Access Point.
This Access Point supports 64/128-bit WEP Encryption function. With this
function, your data will be transmitted over the wireless network securely.
# You can refer to the detail setting from chapter 3.2.6.
Advance setting
It provides more powerful features for you to configuring.
# You can refer to the detail setting from chapter 3.2.8.
Click
Apply
button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.
WEP Setting
35
