can not use WEP encryption.
# You can refer to the detail setting from chapter 3.2.7.
Advance setting
It provides more powerful features for you to configuring.
# You can refer to the detail setting from chapter 3.2.8.
Access Filter
This Access Point allows you to provide a Filter List of MAC addresses
that are allowed associating with this AP.
# You can refer to the detail setting from chapter 3.2.9.
Click
Apply
button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.
Repeater Mode Configuration
If you want a repeater to bridge with another repeater and provide connection service for othrt
wireless station at the same time, you have to set the access point to “Repeater mode”.
Parameter
Description
Parent MAC Address
You have to enter the MAC addresses of other access points that join the
bridging work.
Child MAC Address
You have to enter the MAC addresses of other access points that join the
bridging work.
Mode
802.11b mode:
It allows to select the transmit rate up to 11Mbps
802.11g
mode:
It allows to select the transmit rate up to 54Mbps
Mixed mode:
It provides best performance for 11g transmission when
you enable the AP mode selection to “Mixed mode”.
Broadcast SSID
It will respond to Broadcast SSID requests. If you enable this function,
every wireless station located within the coverage of this access point can
discover this access point easily. If you are building a public wireless
32
