Pi 2 Embedded 502V2S, Hardware Reference Manual

Page: 20 / 20

PI2Embedded 502V2S
Hardware Reference Manual – P2.1 - 6/3/2016
PAGE 20
10 10 10 10 ERRATA ERRATA ERRATA ERRATA
10.1 OVERVIEW
The following table lists the currently known errata for the 502V2S Rev. P2.
Errata # Change
1 The DC Jack, P4 was wired backwards in the revision.
To correct this, it is extended past the edge of the board
and a wire is connected to the ground tab.
2 SIDE and REAR Jack Labels are swapped on the PCB
Silkscreen. A correction paper Label is placed over
each.
Table 10 – Currently Known Errata