Manual I1AM02
MA 1296-A010 EN
22
5.2.4 Limit Switch Connection
Fig.4
Pin assignment of the limit switches
Fig.5
Input wiring
The controller is designed for connection of up to three limit switches type PNP-NOC/NCC.
A limit switch is determined for monitoring the movement in the + direction (limit ),
the second in the
– direction (limit switch –). The third switch (centre switch) for example
can be used as a reference switch. The switch type PNP NCC has the advantage that
cable breaks can be detected.
Mechanical limit switches (NCC) can also be used.
i
CAUTION
– Possible damage!
Damage of the module by wrong connection.
- Do not exchange the 10 pin connector for limit switches with the
10 pin connector for the encoder evaluation.
Summary of Contents for phyMOTIONT I1AM02.1
Page 9: ...phytron 9 MA 1296 A010 EN 4 Technical Data 4 1 Declaration of Incorporation...
Page 10: ...Manual I1AM02 MA 1296 A010 EN 10...
Page 30: ...Manual I1AM02 MA 1296 A010 EN 30 Fig 6 6 wire LVDT RVDT wiring...
Page 31: ...phytron 31 MA 1296 A010 EN Synchronisation Fig 7 Synchronisation wiring...
