Phytotronics WATER PRO, Manual

Page: 12 / 18

12
STATION SETUP
SET STATION 1
1. To set up this station, answer YES using the VALUE switch to enter this
choice.
2. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
3. Choose the activity for this station (AUX, MISTING, IRRIGATION, or NOT
IN USE). Use the
VALUE switch to enter a choice.
4. Push the PRIOR/NEXT switch to NEXT to go to the next question.
5. If choosing AUX , enter in the stations to link to the auxiliary station. Use the
VALUE and PRIOR/NEXT switches to link this station to other stations.
6. Push the PRIOR/NEXT switch to NEXT to go to the next question.
7. Choose the amount of time to have this auxiliary station continue running after
a station which is linked to it, turns off. Use the
VALUE switch to enter this
choice.
8. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
9. To change the name, answer YES using the VALUE switch to enter this choice.
10. Designate the name of this station. Use the VALUE and PRIOR/NEXT
switches to enter the name.
11. Push the
PRIOR/NEXT switch to go to the next station set up.
12. If choosing MISTING or IRRIGATION , choose the type of target (AGING
or FIXED) to use. Use the VALUE switch to enter this choice.
13. Push the PRIOR/NEXT switch to NEXT to go to the next question.
14. If choosing FIXED TARGET , enter in the target. If attempting to determine a
new target, enter a high target (1000 for a misting station and 50,000 for an
irrigation station). Use the
VALUE and the PRIOR/NEXT switches to enter
this target. Refer to the section titled; How to Determine Correct Watering
Targets, for complete instructions on using targets.
15. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
16. Choose the day to begin keeping track of the station. Use the VALUE switch to
enter this choice.
17. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
18. Choose whether or not to use a DISABLE program. Use the VALUE switch to
enter this choice. Remember that a misting station recognizes a disable time
relative to sunrise and an irrigation station recognizes a disable time relative to
sunset. Both misting and irrigation stations reactivate from disables at sunrise.
19. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
20. Choose the VPD Sensor to attach to this station or choose Manual VPD to run
the station as a time clock.
21. Push the
PRIOR/NEXT switch to NEXT to go to the next question.
22. If choosing Manual VPD in order to run this station using time, enter in the
VPD number. The number entered is accumulated once a minute. For example,
if 100 were entered and the Fixed Target was 60000, it would take 10 hours to
reach the target. An accumulation of 100 per minute, 6000 per hour. Use the
VALUE and the PRIOR/NEXT switches to enter this target. Manual VPD
range is 1 to 999.