Figure 3.1.4
Now under the Projects Mode select the
Run Settings tab
Under Deployment click
Add
and select
Deploy to Remote Linux Host
However you see the
<no target path set>
error
Figure 3.1.5
To fix the
<no target path set>
errors do the following:
Click on
Edit
on the left side vertical bar and click on
Phytecindia.pro
Add the two lines below to the bottom of Phytecindia.pro as shown in the screen shot below
target.path += /home/phytec
INSTALLS += target
© PHYTEC Embedded Pvt. Ltd 2014
21
Revision no. 1.0
