2.4. Setting Serial Console (Minicom)
$ sudo minicom -s
Select the option serial port setup from menu on terminal and press
'Enter'
Figure 2.4.1
Using the options at left; make the setting as shown in the figure 2.4.2
For
ex:
Serial device – dev/ttyS0, first press ‘A’ the cursor blinks at the particular line then
change the device name to
/dev/ttyS0
and press
‘ENTER’
.
Figure 2.4.2
After making all changes like
baud rate - 115200
,
hardware flow control - No
etc., press
‘ENTER’
to come out from the screen.Now, select the ‘Save setup as dfl’ it saves the setting as
default. Have a look at the Screenshot below:
Figure 2.4.3
© PHYTEC Embedded Pvt. Ltd 2014
18
Revision no. 1.0
