L-1017e.A3 i.MX 8M Plus BSP Manual
HDMI is always enabled in the devicetree. The other interfaces can be enabled with
The default-enabled Interfaces are HDMI and PEB-AV-10 (LVDS0). We support a
10'' edt,etml1010g0dka display
for
the PEB-AV-10 and PEB-AV-12.
Weston configuration
In order to get an output from Weston on the correct display, it still needs to be configured correctly. This will be
done at
/etc/xdg/weston/weston.ini
.
Single Display
In our BSP, the default Weston output is set to HMDI.
[output]
name=HDMI-A-
1
mode=current
[output]
name=LVDS-
1
mode=off
When using the PEB-AV-10 as output, set the output mode to off for HDMI-A-1 and for LVDS-1 to current.
[output]
name=HDMI-A-
1
mode=off
[output]
name=LVDS-
1
mode=current
Dual Display
For dual display in dual view mode, both modes have to be set to current. The following is an example of output to
HDMI and PEB-AV-10:
[output]
name=HDMI-A-
1
mode=current
[output]
•
•
Notes
HDMI will not work if LVDS1 is enabled.
LVDS0 and LVDS1 can not be used at the same time.
