PHYSITEMP BAT-12 Operating Manual Download Page 12

12

10.0 REPAIRS AND WARRANTY

10.1 If the BAT-12 is to be returned for any reason, please pack it with care and
sent it prepaid to:

Service Department
PHYSITEMP INSTRUMENTS INC
154 Huron Avenue
Clifton, NJ 07013  USA

Please include with the instrument:

1.   

A note describing any problems encountered

2.

The name and telephone number of a person we can contact

3.

The complete return address for shipping.

For service  information on this instrument contact us at:

Tel:

973-779-5577

Fax:

973-779-5954

E-mail:

[email protected]

10.2 Physitemp Instruments Inc. warrants this system to be free from defects in
material  or workmanship for 12 months from date of shipment. Repair or replace-
ment will be made at no charge at the discretion of Physitemp if the defect is not
the result of misuse or abuse. Physitemp accepts no consequential liability for
delay in delivery, alleged faulty performance of the product or any other cause.

Cables and probes are considered expendable and are not covered by this warranty.

For your protection, please pack the item carefully and insure against possible
damage or loss. Physitemp will not be responsible for damage resulting from care-
less packaging. Please return freight prepaid.

Summary of Contents for BAT-12














Reviews: