6
INSTALLATION
1.
2.
Wrap
all four
straps
A
around the
upper and lower
backrest
tubes.
Wrap straps
B
around the
backposts and fasten each
buckle.
3.
Adjust each strap
B
until the
correct tension is obtained.
4.
Position and install lateral
supports
C
on the back
rest
.
MAINTENANCE
Regular cleaning eliminates the accumulation of dirt and grime and helps extend
the life of your backrest. It is recommended to visually inspect the components
of the backrest during the cleaning process.
Cleaning the backrest and lateral support covers
1.
Remove cover from backrest and/or lateral supports and fasten the zipper.
2.
Machine wash in cold water on the gentle cycle or hand wash with a mild
detergent.
3.
Allow to air dry completely.
4.
Reinstall cover on the foam padding.
WARNING
Do not iron.
Cleaning the lateral supports padding
1. Remove lateral support cover, if necessary.
2. Wipe foam padding lightly with a damp cloth, without soap or detergent.
3. Use a clean dry cloth to gently press on padding to absorb excess
moisture, then let air dry completely.
4. Reinstall cover(s) on the lateral support.
WARNINGS
•
Do not use soap.
•
Do not submerge in water.
•
Never machine wash or dry the foam
padding.
Velcro Back
B
A
A
A
A
B
B
C
Four small straps stabilize the backrest vertically and a system of adjustable straps
ensure the backrest is correctly adapted to the width of the wheelchair.
WARNING
Do
not
tighten straps
excessively,
this may
damage the
backposts.
