Physio Control LIFEPAK 20 Service Manual Download Page 295

Page: 295 / 370

LIFEPAK 20/20e Defibrillator/Monitor Replacement

Procedures

Bottom Case

(continued)

W01 Therapy
Connector Removal

Note:

The following assemblies must be removed before beginning this
disassembly:

To remove the W01 Therapy Connector Assembly:
1. Remove the Therapy Connector Seal (268) from the W01 Therapy

Connector.

2. Remove the retaining ring (111) from the back of the W01 Therapy

Connector.

3. From outside the case, remove the therapy connector from the bottom case

and feed the therapy cable through the connector hole.

9-139

Summary of Contents for LIFEPAK 20



















































































































































































































































































































































































Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands

Physio Control LIFEPAK 20, Service Manual

Search results

Summary of Contents for LIFEPAK 20

Reviews:

Related manuals for LIFEPAK 20

Brands by name

Popular brands