background image

MP119EK 3.2.0 01/2021. 1.0

M O T I O N   |   P O S I T I O N I N G

Positioners with Electric Motors

Short Instructions

M-06x / M-11x / M-12x / M-4xx / M-5xx / M-605

These short instructions contain an overview of the most important safety and handling instruc

-

tions for installing and operating positioners with electric motors with the product codes given 

above (x: any number).
Subject to change. These short instructions are superseded by any new release. The latest respec

-

tive release is available for download on our website.

The actions during installation, startup, operation, and maintenance require additional information 

from the manuals of the positioner and/or the electronics.
Manuals may be titled as follows: "User Manual", "Technical Note".

Downloading the Manuals from the Website

1.  Open the website 

www.pi.ws

.

2.  Search the website for the product number (e.g., C-663.12) or the product family (e.g., PICMA® 

Bender).

3.  Click the corresponding product to open the product detail page.

4.  Click 

Downloads

The manuals are shown under 

Documentation

.

5.  Click the desired manual and fill out the enquiry form. 

The download link will then be sent to the email address entered.

If you cannot find the manual you are looking for or if you have any questions: Contact our custo

-

mer service department via [email protected].

User Information

Downloading and Reading the Manual

Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstr. 1, 76228 Karlsruhe, Germany

Phone +49 721 4846-0, Fax +49 721 4846-1019, Email [email protected], www.pi.ws

Summary of Contents for M-06 Series

Page 1: ...oner and or the electronics Manuals may be titled as follows User Manual Technical Note Downloading the Manuals from the Website 1 Open the website www pi ws 2 Search the website for the product number e g C 663 12 or the product family e g PICMA Bender 3 Click the corresponding product to open the product detail page 4 Click Downloads The manuals are shown under Documentation 5 Click the desired ...

Page 2: ...ners with a gearhead X Move the platform of positioners with gear head by hand only if it cannot be moved in any other way Collisions can damage the positioner the load to be moved and the surroundings X Mount the positioner and the load so that the load cannot get jammed or blocked or collide with objects in the workspace Unsuitable mounting can warp the positioner and reduce the accuracy X Mount...

Page 3: ...load must be lower than the maximum torque of the drive see manual NOTICE Damage due to incorrectly inserted screws X Select the screw length according to the depth of the mounting holes X Do not allow screw heads to pro trude X Mount the positioner over the holes pro vided X Affix the load to the mounting holes provi ded X Check that the positioner and the load are fixed firmly Correct Mounting M...

Page 4: ...y not be disposed of in EU member states via the municipal residual waste Dispose of your old equipment according to international national and local rules and regulations PI undertakes environmentally correct and free disposal of all old PI equipment made available to the market after 13 August 2005 If you have an old device from PI you can send it to PI free of charge Companies Physik Instrument...

Reviews: