MP119EK 3.2.0 01/2021. 1.0
M O T I O N | P O S I T I O N I N G
High accelerations can cause damage to or
considerable wear on the mechanics.
X
Stop the motion immediately if a controller
malfunction occurs.
X
Move to the end of the travel range at low
velocity.
NOTICE!
Damage due to improper mounting!
X
Pay attention to the safety instruc
-
tions in the "Installation" section.
X
Linear stage
: When the motion axis is
oriented vertically, the load must be
lower than the holding force of the
drive (see manual).
X
Rotation stage:
When the positioner
is mounted vertically, the load must
be lower than the maximum torque
of the drive (see manual).
NOTICE!
Damage due to incorrectly inserted
screws.
X
Select the screw length according to
the depth of the mounting holes.
X
Do
not
allow screw heads to pro-
trude.
X
Mount the positioner over the holes pro
-
vided.
X
Affix the load to the mounting holes provi
-
ded.
X
Check that the positioner and the load are
fixed firmly.
Correct Mounting
Mounting on an Uneven Surface
Incorrect Alignment of the Load
Incorrect Fitting of the Screws
The instructions required for startup and
operation are in the manual for the electronics
used.
NOTICE!
Damage due to improper maintenance.
X
Unscrew only according to the
instructions in the manual.
Mounting the Positioner
and Load
Starting up the Positioner
Maintenance
