2.2
Option Boards
Options are typically installed at the factory. If you need to install an
option, read the following procedure before you begin. Figure 2-3
shows a top view of the chassis with options installed.
CAUTION!
Circuit boards may be destroyed by a small
static discharge. To avoid damaging the
boards, use the following precautions:
• Handle boards at approved ESD
workstation.
• Do not touch any electrical contacts.
• Do not rub a board against any insulator
that may build up a static charge.
• When shipping boards, use approved
ESD containers and packaging.
Install first
----cc=--c-
-
--
-
- -�-,-,------ �
-_-
_ __:-- _
-_�__:_��-�
CCC
_�_-
__:_
--�--:--�------�"---
►'
ribbon cable
retainer here
Install
Computer
Interface
option here.
--tc��:==3t�lP==='��=c=:=��
=
=p===4
Install
Setpoint
or Bakeout
option here.
Figure 2-3. Location of Setpoint/Bakeout and Computer Interface Options
2-4
Installation
