Install and test the armrest horizontal.
The shaft armrests on both sides of the back should be rotated as the picture
shows, until they can not rotate.
The leather covering of armrests should be inserted upward to the armrests‘
shaft, the two holes on the iron pipe of the armrest should be against the screws
of armrests‘ shaft, please pay attention.
The stainless steel screws in the accessory should be fixed from the bottom up in
the shaft on the armrests.
14
14
Pillows and moving foot pad should be inserted into the back part and foot part
respectively, and fixed.
The power cord plug of beauty bed should be inserted into the junction box. The
installation of junction box must be through the air switch.
15
1.
2.
3.
