User Manual
Greasehead
145-2884-HV0
OPS-2884 Rev E
12
5.3 Safety
•
Ensure all pressure testing is carried out in the appropriate testing area
by suitably qualified personnel.
•
Wear appropriate personal protective equipment.
•
Do not over exert yourself while using torque wrenches. Use
appropriate mechanical advantages when available.
•
Ensure that all tools and equipment are in good condition and are
suitable for the intended use.
•
Clear up any fluid spills immediately to avoid slips.
5.4 Tools
The following tools are required:
•
Memac Chain Wrench (No2 with 14’’ chain)
Other pipe wrenches may be used but will mark equipment
•
3/8 hex Allen key
•
7/8’’ Spanner (If NPT Plug to be fitted)
•
Wire Brush