1.
2.
3.
4.
Setting the language for voice - With meter
off, by pressing the M key and hold for 2
seconds, you will enter the setting mode
viewing an “S” or “E” flashing on the screen
depending on your last language setting.
A small “SET” will be displayed at the upper
right corner of the LCD display. The meter is
now in the setting mode. S indicates Spanish
and E indicates English. Pressing C key will
toggle between “S” and “E” and to set the
language selection, please press M key to
select the language.You will then view the last two digits of
current year is displayed in the center of screen. The C key is used to
change the individual settings. Press M key to confirm each setting.
You will hear:
“You are now in Setting Mode.”
Set the Year - Press C key to adjust the year
until the desired year is displayed and then
press the M key to confirm the year setting.
When pressing the C key, the year will be
adjusted in the range of 2009 to 2029. After
the year setting is confirmed, you will see the
month segment flashing on the screen.
(Each time you press the C key to adjust the
year,
you will hear:
“The year is 20
xx
.”
If
year 09 is selected, and you will hear:
“The
year is 2009.”
)
Set the Month - Press C key to adjust the year
until the desired month is displayed and then
press the M key to confirm the month setting.
You will then see the day segment is flashing
on the screen. (Each time you press the C key
to adjust the Month, you will hear:
“The
month is
xxx.
”
If December is selected, and
you will hear:
“The month is December.”
)
Set the Day - Press C key to adjust the day
until the desired day appears and then press
the M key to confirm the day setting. You will
then see the hour segment is flashing on the
LCD screen. (Each time you press the C key to
adjust the day, you will hear:
“The day is
xxx.
”
th
If 18 is selected, and you will hear:
“The day
is the eighteenth.”
)
1
2
3
13
:
1-01~01 01
AM
SET
SET
:
12-01~0101
AM
SET
SET
4
:
12-18~0101
AM
SET
SET
