background image

9

5

. Safety Information

Please use this device only for the intended use described
in this user guide. 

Before using this system to test your blood glucose
please read instructions thoroughly and practice the test
when you first use this system. Do a quality check on

 

the system following the instructions and consult

 

with your healthcare professionals for questions or

 

problems

.

Be aware of the safety of young children or handicapped 
persons near you when you conduct a glucose test using 
this system.

Only use test strips and control solutions from 

Smartest

the same manufacturer of the meter.

Please keep the test strip vial away from children. The 
test strips and vial cap can present a choking hazard.

Please be cautious when removing the lancet. Take the 
lancet out carefully. Always place the protective cap 
back on the exposed tip or (if using a twist lancet)
place the cap on a hard surface and push the exposed tip 
into the protective cap and discard of properly.

Please test your blood glucose using the meter and the 
test strips with the same reference number as labeled on 
the outer box of meter and the test strips.

Summary of Contents for Smartest Pronto


































Reviews: