Z- axis Calibration
Z-axis calibration is essential for every 3D printer. Run this test to make sure that the
building plate is leveled to the LCD screen. This is to ensure that models and prints
will adhere to the building plate.
SONIC MINI 8K
Step 1:
Remove the Resin Vat
Make sure to remove any objects present on the machine's platform.
Step 2:
Install the Building Plate
Attach the building plate knob to the printer and align it with the pins. Screw and tighten the
building plate.
*Note: Please ensure that the building plate does not shift during tightening.
Step 3:
Loosen the Screws
Use the Allen wrench to loosen all 4 screws on the sides of the building plate in a
counterclockwise direction. After loosening it, double-check to see if the plate is loose and
movable.
