Phottix Juno Li60, Manual

Page: 14 / 44

14
Tx (OdinII Transmitter Mode)
Using the Juno Li60 Hot Shoe Flash in Odin II Tx Mode allows for
a flash to be used on-camera in Manual Mode as well as control
four groups (A, B, C, D) – adjusting manual power levels as well as
flash head zoom on Juno Li60, Juno TTL Hot Shoe Flashes set in
Odin II Rx Mode.
OdinII Tx Mode interface
Using OdinII Tx Mode
After selecting OdinII Tx Mode (above)
1. Press “Gr” Button to cycle through M (Master flash), A,B,C,D.
2. Pressing the Mode Button while a Group is selected will
change On or Off.
3. Use the Selection Dial when a group is selected to adjust the
power level (1/128 to 1/1 in 1/3 stops).
4. Press the OK Button to confirm and exit the Odin II Tx Mode
editing menu.
Flash Zoom adjustment in Odin II TX Mode
1. Press “Gr” Button to cycle through M(Master), A, B, C, D groups.
2. Press “Zm” Button to access the zoom adjustment screen.
3. Use the Selection Dial to change the zoom of the selected
group, the master flash can be set zoom 20mm, 24 mm, 28 mm,
35 mm, 50 mm, 70 mm, 80 mm, 105mm, 135mm and 200mm
4. Press OK Button to confirm and exit the zoom adjustment
screen.