Photron FASTCAM Mini AX100, Hardware Manual

Page: 31 / 63

17 FASTCAM Mini WX50/100 Hardware Manual
1.3.7. Signal Delay
With the system, you can set the signal delay time or pulse width for the various signals that are
input and output. Pulse width and delay settings for the various signals to input/output are made with
PFV. The content of each setting is listed in the chart below
Setting Item Setting Range (Value)
TRIG TTL IN DELAY 0-5 (s) 100 ns units
SYNC IN DELAY 0-1/frame rate (s) 100 ns units
GENERAL IN DELAY 0-5 (s) 100 ns units
TRIG OUT WIDTH 0-1/frame rate (s) 100 ns units
SYNC OUT DELAY 0-1/frame rate (s) 100 ns units
SYNC OUT WIDTH 0-500 (us), 1/frame rate (s) at 2,000 fps or higher 100 ns units
EXPOSE OUT DELAY 0-1/frame rate (s) 100 ns units
SYNC OUT TIMES 0.5, 1, 2, 4, 6, 8, 10, 20, 30 (* x1 is standard output)
SYNC OUT TIMES
Output a SYNC (vertical synchronization signal) from SYNC OUT that is X times SYNC.
Example: For a frame rate of 1,000 fps, SYNC OUT TIMES setting of 2.
Example: For a frame rate of 1,000 fps, SYNC OUT TIMES setting of 4.
 Please refer to “10.6.2
Signal Delay
” of “Photron FASTCAM Viewer User’s Manual” for the details
of the setup.
SYNC OUT Output
1,000 fps Synchronization Signal
1,000 fps Synchronization Signal
SYNC OUT Output