10. FAQ
42
GigabitEthernet Interface Connected Manual
Q.3.
What is the difference between simply selecting
[Auto detection]
and
selecting
[Select IP-address]
to register each IP address on
[IP-address
dialog]
?
A.3.
There may be some difference in the startup time when starting up the PFV
application. When
[Auto Detection]
is selected
,
the application looks for
applicable camera systems by the IP address, which takes a little more time.
You can control only the specified camera(s), if there are several camera
systems on the Network, if the IP address of each camera is registered.
On the other hand, if the network has a DHCP server in it, which assigns IP
addresses for all devices in the network, the IP addresses assigned to cameras
may be changed every time they are connected to the network, and the PC is
required to be set in the
[Auto detection]
mode in advance to find the camera
systems.
Q.4.
Is it possible to use the camera systems by connecting them to an existing
1000BASE-T network? Is it also possible to control the cameras in a WAN-
connected network (e.g., controlling a camera remotely from other locations)?
A.4.
It is technically possible but we do NOT recommend it because of possible
security issues involved. Please note there is NO assurance of security.
We only recommend using the camera system in a closed network.
Please contact our engineering manager regarding cases in which you connect
multiple PCs and cameras.
Summary of Contents for Fastcam MC 2.1
Page 1: ...G Gi ig ga ab bi it tE Et th he er rn ne et t I In nt te er rf fa ac ce e...
Page 6: ...6...
Page 11: ......
