5
| no.
: NOCTURN-SDI720p-CAM-QSG
Rev B.01
Photonis Digital Imaging, LLC
6170 Research Road | Suite 208
Frisco, Texas 75033 United States of America
1.
Start here
Congratulations on your new NOCTURN SDI720p camera from PHOTONIS. This document is intended to show
you how to connect the camera and start displaying video on an HD-SDI 720p compatible monitor. Interface
details and additional support information are described in separate documents. Please contact Photonis
technical support at
if you require additional information.
2.
What is in the box?
Before getting started verify the content of your NOCTURN SDI720p camera box.
2.1.
OEM Version
One (1) NOCTURN SDI720p camera
One (1) ¼-20” tripod mount adapter
NOTE
The OEM version of the camera does not include a power supply. The user can still power the camera using the
USB power adapter with the micro-B USB connector located on the back camera. If powering using a USB
interface, it is recommended to connect to either a high power charging port or a USB charger capable of
delivering at least 1 A of continuous current.
2.2.
End user Version
One (1) NOCTURN SDI720p camera
One (1) ¼-20” tripod mount adapter
One (1) SMA to BNC adapter
One (1) Power/GPIO breakout cable for the NOCTURN SDI720p camera
One (1) AC/DC power adapter for the NOCTURN SDI720p camera
One (1) set of international power adapter blades for the AC/DC power supply
One (1) USB flash drive with documentation and control software
One (1) c-mount lens (optional)
3.
Things needed to get started
To get started you will also need the following:
One (1) support 110/220VAC power outlet
One (1) HD-SDI compatible monitor
NOTE
The NOCTURN SDI720p camera is configured at the factory for either 50/60Hz. Please make sure that the
monitor used to display the camera video is compatible with this refresh rate of your camera.
