10
| no.
: NOCTURN-SDI720p-CAM-QSG
Rev B.01
Photonis Digital Imaging, LLC
6170 Research Road | Suite 208
Frisco, Texas 75033 United States of America
2.
Clean the external body of the camera, including connectors, with a dry, lint free cloth and soft brush
if necessary to remove dirt, dust and debris. For caked on dirt, the cleaning cloth may be moistened
with a small amount of water or Methanol.
To avoid damage to the camera hardware, do not immerse the camera in any type of liquid, and do not pour
any liquid on, or in the camera.
3.
Visually inspect the sensor for dust, debris, and residue (e.g., fingerprints, smears, etc.)
4.
Clean the sensor and board with low pressure, dry, compressed air or nitrogen if necessary.
5.
If there are fingerprints, smears, or other oily residue, the sensor glass may be cleaned with a lint free
cotton-tipped applicator moistened with a small amount of isopropyl alcohol. Allow the sensor to air
dry.
6.
After the sensor is dry, visually verify no residue remains.
8.
Storage
In preparation for storage, it is recommended that all cables and connectors be removed from the camera.
1.
If operating, shut down and power off the core.
2.
Disconnect all cables
3.
Visually inspect the external surfaces of the core and connectors for damage, bent pins and ensure
they are clean and free of debris.
4.
Clean the external body of the core, including connectors, with a dry, lint free cloth and soft brush if
necessary to remove dirt, dust and debris. For caked on dirt, the cleaning cloth may be moistened with
a small amount of water, Methanol or IPA.
To avoid damage to the camera hardware, do not immerse the camera in any type of liquid, and do not pour
any liquid on, or in the camera.
5.
If necessary, clean the sensor and board with low pressure, dry, compressed air or nitrogen. If there
are fingerprints or other oily residue evident on the sensor glass, the sensor glass may be cleaned with
a lint free cotton-tipped applicator and Methanol.
6.
If the sensor is cleaned allow the sensor to air dry.
7.
Once the sensor is fully dry, install a protective blue lens saver dot.
8.
Place the camera in a protective ESD bag and package.
9.
For long term storage, a humidity and temperature controlled environment is recommended, however,
the ambient temperature in the storage area should not exceed the range of 50°C to +80°C.
9.
Need help?
9.1.
Download the user manual
To learn more about your NOCTURN kit, download the user manual at www.nocturncamera.com.
CAUTION
CAUTION
