8
4 Basic Operations
4.1 Power On/Off
The long press End Key to turn on the phone, your phone should go to idle screen and is ready to
use.
You can turn the phone off with long pressing the End Key.
Note: Be sure to insert the battery before using the phone
4.2 Make a Call
While your phone is power on and at idle screen, enter a destination number you wish to call and then
press
DIAL
Key. (Note: To modify digits you enter, you can press
Clear
Key to delete wrong digits first
and then enter new digits). Once the call is connected, the phone
’s screen will display the number you
have dialed, and the time duration the call has lasted.
The phone also has a speaker. To use the speaker to make a call, press
SPEAKER
Key, enter a
phone number, and press
DIAL
Key.
4.3 Answer a Call
When there is an incoming call, the phone will ring and display the Phone number of the incoming call
(if the number is available). You can pick up the handset or press
SPEAKER
Key to answer the
incoming call. The ring tone and ring-tone volume can be changed in the sounds menu.
4.4 End a Call
You can end a call by pressing
END
Key. If you are using the handset for a phone call, hanging up
the handset will end the call automatically.
4.5 Call Waiting
If you have enabled call waiting feature, you can hold the current call party and switch to the new
incoming call by click
Answer
or
Green
key. And also, you can switch with the current caller and
hold caller by click
Green
key. You can also finish the current call by click
End
key then continue to
speak with the hold caller.
4.6 Conference call
If you wish to have more than one called party listen in to the call, you can make a conference call.
When you dialed to the first party, and want to make the second call, you can directly dial the second
number in the call interface (this time the first call is under hold), then you can press
Send
key to
connect the three people together.
NOTE:
Call waiting/Conference feature is network dependent
4.7 Call handling during data session
You can accept the incoming call during the Data call session, while doing so the data connection will
be hold and will resume automatically after the voice call ended. There is also an option to ignore the
incoming voice call while a data call is in progress. You can also make a voice call when the data
session is in dormant mode.
Please activate Call W aiting feature on your phone if you want to accept a voice call during the data
session.
