© PSI (Photon Systems Instruments), spol. s r.
o.
33
12
GPS MODULE
PlantPen device has integrated GPS module which can be turned on during the measurement and the GPS coordinated will
be added to the downloaded data.
For proper GPS reading, the time in your PlantPen and in your computer must be synchronized. Preset
time and time zone must correspond to GPS time (time zone) in your location.
12.1
GPS / PLANTPEN OPERATION
1.
Check the time setting in PlantPen device:
Settings > Date & Time
2.
Switch the GPS module on:
•
Select:
Accessories > GPS
•
Press
SET
to confirm.
•
Wait until the GPS position is found
–
“
Starting GPS
”.
•
The GPS module is ready when the icon in upper panel change
–
see on Fig. 21.
Fig. 21 GPS icons.
3.
Go to
Measurement
and choose required protocol.
The device may need a clear view of the sky to acquire satellite signal.
Keep in mind that the PlantPen turns off automatically after about 8 minutes of no action.
Turning off the PlantPen always turns off GPS module.
For prompt determination of the coordinates use the option
Accessories
> GPS > Location.
Summary of Contents for PlantPen NDVI 310
