Thumb screw
to hold reflector
Umbrella holder (shaft
passes through knock-out
in reflector)
Thumb screw for umbrella shaft
AC cord
connector
Modeling lamp
Flashtube
Reflector, soft box,
or other “quick-change”
attachment
CONTROL PANEL AND BASIC OPERATION:
Power Input:
The power required to operate the StudioMax III is 105 to 125 volts AC,
50/60 Hz, 4 Amp, and/or, for a B (battery) model, an approved DC battery
power pack (not included). The power cord has a 125V, 10 Amp. rating.
Replacement cords or extension cords rated for less amperage may
overheat and should not be used with StudioMax III.
Top tabs
Radio-sync
channel set
(“R” models)
battery cable
connector
(“B” models)
