2- SAFETY RULES
3- SAFETY DEVICES
5-
INTENDED USE
This machine is intended to Cure 3D-printed parts only inside its enclosure.
This machine is not intended to work outdoors without suitable protection.
When the machine is positioned correctly, locate the mains plug lead and plug it into the socket on the rear
of the machine. Push and plug in and twist clockwise to engage the power.
4- ENVIRONMENTAL PROTECTION
CURE M+
Recycle:
Always recycle old damaged or redundant parts or
packaging materials.
1- SYMBOLS USED IN
THIS USER MANUAL
Danger:
Immediate danger that may cause severe injury or
even death to persons.
Caution:
Possible hazardous situation that could lead to
mild injury to persons or damage to property.
Warning:
Possible hazardous situation that could lead to
severe injury to persons or property.
Warning:
Do not touch the interior of the machine with bare
hands immediately after a full curing cycle has been
completed.
Danger:
Never circumvent the door safety switch as the LED
unit will cause severe damage to vision.
Warning:
Under no circumstances must the machine be
operated with the door open.
Recycle:
Old machines contain valuable materials that can be
re-used or recycled: please send your old machines
to a suitable recycling centre at the end of its lifespan.
Recycle:
Most of the packaging material can be recycled.
Please do not throw the packaging material into
a domestic household waste system, send it for
recycling.
8
Caution:
Possible hazardous situation that could lead to
mild injury to persons or damage to property. This
machine is 20 kg (44.1 lbs), make sure to follow
correct lifting procedures when handling.
Recycle:
Remove the outer packaging and recycle it.
