Phonic WM400-L, User Manual

Page: 5 / 22

5
WM 400-R / 400D-R / 400-L / 400D-L
PRODUCT DESCRIPTION
These wireless receivers can be used in con-
junction with any active speaker. The receiver
can be attached to the speaker by screwing it
into the stand’s screw socket.
1. 4 Digit Display
(WM400D-L and WM400D-R only)
This display will allow users to see the
properties that are currently in use by
the WM400D, whether you are adjusting
the receiver channel (indicated by CH),
the EQ settings (indicated by EQ), the
delay time (indicated by only the delay
time in milliseconds) or the high and
low pass filters (indicated by a H or L,
respectively). When this unit is powered,
the 4 digit display will light up.
. AF Indicators
When this LED is illuminated, it indicates
that there is an audio signal being
received by the WM400(D) receiver.
. RF Indicators
When the RF indicator illuminates, it
shows that the transmitter’s signal is
being received successfully. If for some
reason this LED does not turn on, check
your DC power input and pre-set chan-
nel configuration and try again.
4. Bypass Indicator
(WM400D-L and WM400D-R only)
This LED will light up when the digital
processing feature of the WM400(D) re-
ceiver is off.
5. Power Button
hold this button down for seconds to
power up the unit.
6. Bypass Button
(WM400D-L and WM400D-R only)
Push this button to turn the digital
processing feature on and off.
10
1
9
5
8
WM400
WM400D
1
4
5
6
7
1
10