4
English
Deutsch
Español
Français Português
日本語
简体中文
PM801
V10
CONTROLS AND SETTINGS
8. Tone Controls
This control allows users to attenuate the high or low frequency
signals of the corresponding channel. By turning to the left, the
low frequency sounds are reduced somewhat (and are reduced
further as the control is turned further), and turning the control to
the right has the same effect on high frequency sounds.
9. Clip Indicators
This small LED indicator will illuminate 6 dB before the signal
of the channel is dynamically clipped. If it flashes it is advisable
to turn the level control down somewhat to reduce the signal’s
level and avoid distortion.
10. Mute Buttons
These buttons affectively mute the corresponding channels,
ensuring signals received by the channels are not sent onto the
main mixing bus.
11. Channel Level Controls
This control will alter the signal level that is sent from the
corresponding channel to the main mixing bus.
12. Master Level Control
This control is the final level control for the Main signal, sent to
the Main output on the rear of the PM 801.
13. Power Switch
This switch is used to turn the mixer on and off. Ensure you
turn all level controls down before activating as to avoid any
unwanted signals being sent through the output.
