Phonic PHA 8800, User Manual

Page: 5 / 18

1
English
PHA 8800
INTRODUCTION
Congratulations on your purchase of another quality
product! We hope your PHA8800 headphone distribution
amplifier proves itself to be a worthwhile investment
and provides you with years of dependable use. These
units were meticulously designed by skilled engineers to
provide you with up to unique monitoring mixes, sent to
up to 16 sets of headphones simultaneously.
We know how eager you are to get started, however
we advise that you take the time to read through this
manual before storing it in an easy to remember place
for future reference. Within this manual you’ll find helpful
information on the operation and treatment of your PHA
unit.
FEATURES
l Professional multi-purpose headphones amplifier
system for stage and studio application
l
Eight totally independent stereo high-power amplifier
sections in one rack space
l Two stereo main inputs for two independent mixes,
accessible from all eight channels
l Eight independent direct inputs provide up to eight
individual stereo mixes
l Highest sonic quality with virtually all types of
headphones even at maximum volume
l
Output level control and accurate LED output meter
per channel
l
Mono/stereo switch per channel for more flexibility
l One front and one rear 1/” TRS phones connector
for each channel
l Direct input connector on each channel for easy
connection of any sound source
l Servo-balanced 1/” TRS inputs and outputs
l
Ultra low-noise operational amplifiers for outstanding
audio performance
l High-quality potentiometers and illuminated switches
l High-quality components and exceptionally rugged
construction for long life and durability
l Toroidal transformer for noiseless operation and low
magnetic interference
INITIAL SETUP
1. After opening and unpacking the PHA, inspect the unit
for any noticeable damage. Though we attempt to
take every precaution possible in preventing damage
occurring to our products in transit, it is sometimes
unavoidable. If the product is noticeably damaged,
users are advised to contact the dealer at which they
purchased the product.
2. If you wish to mount the PHA into a 19” rack, ensure it
is not positioned above power amplifiers and that the
unit has plenty of ventilation, as to avoid overheating.
. Plug any required devices into the PHA’s inputs and
outputs. For example, a mixer’s Phones or Control
Room signal could be sent to the Main Inputs, and
headphones plugged into the phones outputs on the
rear or on the front of the unit.
. Set the Main 1 / Main 2 Button to the correct position
(In/Out) to enable the required signal to be sent
through to your required outputs.
5. Plug the provided power cord into the power connector
and into an appropriate AC power source. Be sure
to check local voltage levels before connecting the
unit. Do not under any circumstances defeat the
ground-pin of the cord, as it is provided for your own
protection. When plugged in, push the power button.
UNIT OVERVIEW
Front Panel
1. Master Level Control
These controls adjust the level of their corresponding
main inputs on the rear of the device.
2. Input Level Meter and ON LED
This -segment input meter gives users a visual
representation of the signals received by the PHA’s
inputs. When the power is on, the ON LED will illuminate.
To make the most of your audio, set the level so this
meter sits just below the clip LED.
1
2