Phonic PCT-3000, User Manual

Page: 9 / 24

English
5 PCT-3000
Group Settings
1. Push and hold the MENU button on the receiver.
2. Push the MENU button until the GRP option is blinking.
3. When GP is blinking, use the UP and DOWN buttons
to adjust the selected group. The PCT-3000 has 26
preset and 1 user-adjustable groups available for use.
4. Push and hold the MENU button to save your settings.
Channel Settings
1.
Push and hold the MENU button on the receiver.
2. Push the MENU button until the CH option is blinking.
3.
When CH is blinking, use the UP or DOWN buttons on
the PCT-3000 receiver to adjust the selected channel.
4.
The PCT-3000 has 16 selectable channels per group
on both preset and user-defined groups.
5.
To autoscan for a new channel, push and hold either
the UP button on the PCT-3000 receiver. When using
autoscan, the IR port of both the PCT-3000 and the
transmitter should be facing one another.
6.
Push and hold the MENU button to save your settings.
User-Defined Frequency Settings
1. Push and hold the MENU button on the receiver.
2. Push the MENU button until the U/P option is blinking.
3. Push the UP or DOWN button so that “U” is selected.
4. Push the MENU button so that CH is flashing. Please
note there is only 1 group under “User” mode.
5. When CH is flashing, push the UP or DOWN buttons
to select a channel.
6. Push MENU again until the first 3 digits of the on
screen frequency are flashing. Push the UP or DOWN
buttons to adjust the value. Push MENU again so that
the second set of digits are flashing and, again, push
UP or DOWN to adjust the value.
7. Push and hold the MENU button to save your frequency.
Up to 16 independent frequencies can be set within the
user-adjustable group.
Synchronize With Transmitter
1. Hold the microphone transmitter’s IR port close to the
IR port of the current channel.
2. Push and hold the MENU button on the PCT-3000.
3. The lock symbol will be the first icon to flash on
screen. You can simply push and hold the DOWN
button to transmit group and channel information to
the transmitter.
Squelch Settings
1. Push and hold the MENU button on the PCT-3000
receiver.
2. Push the MENU button until the SQ option is flashing.
3.
Push the UP and DOWN buttons to increase the
decrease the squelch settings, respectively.
4.
There are 4 different squelch sensitivities to choose
from.
Lock Mode
1. Push and hold the MENU button on the PCT-3000.
2. The lock symbol will be the first icon to flash on screen.
You can simply push the UP or DOWN buttons to adjust
lock feature on and off.
UP Blinking
Down
Press
UP Blinking
Down
Press
UP Blinking
Down
Press
UP
Blinking
Down
Press
Blinking
Press
Press
UP
Blinking
Down
Press