Phonic MU 1705, User Manual

Page: 14 / 24

PHONIC CORPORATION
Page 14
MU1705 USER’S MANUAL
16. MASTER DISPLAY
This blue PWR LED will light when the power is
on.When you would like to monitor any in put chan-
nel or output signal, de press its PFL but ton , or its
AFL button in GROUP, and the mas ter level meter
will show you the sig nals which you have chosen.
In addition, the green PFL LED in di ca tor will light
up.The 13-segment LED meter shows the lev el of
mas ter mix L and R in the ste reo mode.
17. MONO LEVEL CONTROL
The MONO output signal mixes the pre-
fad er sig nal of the MAIN L/R. You can use
this signal as the cen ter cluster or apply it to
another area. This knob con trols the level of
the mono mix output.
18. MAIN L/R OUTPUT FADER
These 60MU long faders adjust the out put level
of the MAIN L/R.
A +48V global Phantom Power master switch
lo cat ed in the rear panel, available for condense
mi cro phone on each mi cro phone in put chan nel. All
fad ers (CH1~11, Group 1, Group 2, L/R and MONO
) should be all the way down when this phantom
pow er is switched on. In order to pre vent ex ces sive
noise to stage mon i tor speak ers and main speak-
ers, you should not have condensor mi cro phones
pluged in when the +48V master switch is on.
19. POWER SWITCH
Before you turn on the power switch, please pull
down all the faders to the bottom to prevent un-
want ed tran sient high level signals from destroying
your audio system. The power on LED will light up
in the dis play sec tion when you turn on the power
switch. The de scrip tion beside the power socket tells
you the part num ber of power supply adaptor for your
local main power.
18. PHANTOM POWER SWITCH
REAR PANEL DESCRIPTION
REAR PANEL DESCRIPTION