Phonic iSK10A Deluxe, User Manual, Page: 6 / 16

2 iSK8A DELUXE / iSK10A DELUXE / iSK12A DELUXE / iSK15A DELUXE / iSK215A DELUXE / iSK18SBA DELUXE
English
SK 18SBA Deluxe
-
SK 15A Deluxe
1. Gain: This rotary control adjusts the incoming signals
from Inputs A and B. Setting them to the left-most
position (-
∞
) will completely cut the incoming signal,
whereas the right-most position will add 10dB of boost
to the signal.
2. Input A & B:
These XLR inputs accept balanced and
unbalanced signals from line-level devices.
3. Phase Reverse: The phase reverse switch can help
you better align your speaker signals in larger setups
when more than one crossover is utilized. It switches
the phase of your signal 180 degrees. Activating this
switch will have no repercussions on your system so
we advise auditioning your setup with this switch both
on and off.
4. Output A & B: These output connectors are for line-
level output to further subwoofers.
5. Hi-Cut Frequency: This allows adjustment of the hi-
cut filter's cut-off frequency between 60Hz and 150 Hz.
This helps the subwoofer concentrate on lower bass
frequencies rather than wasting amplifier power on
high-frequency signals.
1. Gain: These rotary controls can be found alongside
both the Microphone and Line inputs. They adjust
the incoming signals from their corresponding inputs.
Setting them to the left-most position (-
∞
) will completely
cut the incoming signal, whereas the right-most position
will add 10dB of boost to the signal.
2. Microphone Input: This XLR input is ideal for
connection of professional dynamic and ribbon
microphones.
3. Line Input:
This 1/4" phone jack is ideal for input of
balanced and unbalanced line-level signals. This could
include external digital and analog mixers in addition
to signal processors (such as crossovers and graphic
equalizers).
4. Pre-Gain Mix Output: This line-level output allows for
extended operation. It sends the pre-gain, pre-EQ mix
from both inputs to other active speakers.
5. EQ High: This control allows high-frequency signals to
be boost or cut by ±10 dB.
6. EQ Low: The low-frequency EQ control allows a boost
and cut of ±10 dB to low frequency audio.
SUBWOOFER 2-WAY MODELS